112
Notify the surveillance centre: Alarm triggering of the NVR/CMS for further processing (e.g.
recording on NVR, or full-screen display when alarm is
triggered in CMS)
8.6.3 Exceptions
Events can trigger the following exceptions:
- HDD full: If the internal SD card or a linked NAS drive is full
- HDD error: SD card or NAS drive error
- Network disconnected: Ethernet cable removed
- IP address conflict
- Illegal login: a reaction can be programmed to follow an incorrect login
The following reactions can be programmed:
- Send email:
- Notify surveillance centre (NVR/CMS)
- Activate alarm output
8.6.4 Acoustic alarm output
The acoustic alarm output can play predefined sounds or individual short sound media. This function can only
be used with a camera with audio output or integrated loudspeaker.
Apply the settings by clicking “Save”.
NOTE: The audio volume is factory set to 100%. When testing or using
the function, protect your hearing by keeping your distance from the
camera or using hearing protection.
To Next Page
Loading...
