Need help?Do you have a question about the AC Infinity AIRCOM S9 and is the answer not in the manual?
General| Model | AIRCOM S9 |
|---|---|
| Fan Size | 120 mm |
| Fan Quantity | 3 |
| Power Consumption | 12W |
| Operating Voltage | 12V DC |
| Material | Plastic and Metal |
| Color | Black |
| Power Source | AC Adapter |
Set temperature and speed settings on the control module according to your model.
Cycles through ON, AUTO, SMART, and OFF modes for system operation.
Adjusts fan speed settings for ON, AUTO, and SMART modes.
Details ON, AUTO, SMART, OFF modes, including fan behavior and temperature triggers.
How to adjust fan speed in ON, AUTO, and SMART modes for optimal airflow.
Set AUTO mode as thermostat; fans run when PROBE temp exceeds SETTING temp.
Fans run continuously regardless of temperature; sets max speed for other modes.
Thermostat mode: fans run when PROBE temp meets/exceeds SETTING temp, stop 4°F below.
Energy-saving mode; fan speed adjusts based on temperature, using ON mode speed as max.
Set alarm temperature; alarm activates when PROBE temp reaches it in ON/AUTO/SMART modes.
Adjusts temperature buffer for AUTO/SMART modes (2°F/1°C or 4°F/2°C).
Fan sensor interference detected; check fan for issues or replacement.
Flashes when PROBE temp reaches set ALARM temp; see Alarm Setting.
Icon flashes when buttons are pressed while controller is locked.
To Next Page
