26
TENT SETUP
CLOUDLAB 632D / 743D / 864D
STEP 8
Add the roof support beams (G), (E) then
(F). Insert the spill pool into the tent and
secure the Velcro straps around the poles.
Place the drying rack on the assembled
shelf. (Make sure to tie the small spill pool
on top of the drying rack.)
STEP 7
Apply the mylar wall using the interior Velcro
to divide the two chambers. Press the wall
firmly to avoid gaps.
E
F
G
FE G
NOTE: AC-CBD864 model has (x2 “E” Roof Bar)
To Next Page
Loading...
