Name: AC Infinity CONTROLLER 76
Brand: AC Infinity
Rating: 4 (1 reviews)

To Next Page

To Previous Page

CALIBRATION TEMPERATURE SETTING

This setting adjusts the temperature reading that the

sensor probe is measuring. Press the up or down

button to increase or decrease the data figure by 2°F

(or 1°C) increments. The calibration cycle ranges

from -8°F to 8°F (or -4°C to 4°C) and will be applied

to the sensor probe’s measurements.

CALIBRATION HUMIDITY SETTING

This setting adjusts the real humidity reading that

the sensor probe is measuring. Press the up or down

button to increase or decrease the data figure by

1% increments. The calibration cycle ranges from

-8% to 8% and will be applied to the sensor probe’s

measurements.

CLOCK SETTING

This setting adjusts the current clock time. Press the

up or down button to increase or decrease the time.

Every cycle past 12:00 will switch the time between

AM and PM. The current clock time will be shown at

the lower left corner of the display.

PROGRAMMING

CLOCK

CALIB. T°

CALIB.

Questions and Answers:

Need help?

Do you have a question about the AC Infinity CONTROLLER 76 and is the answer not in the manual?

AC Infinity CONTROLLER 76 Specifications

General