21
BUFFER TEMPERATURE SETTING
The buffer used in the auto mode temperature trigger
can be adjusted to prevent the device from turning on
and off too quickly due to changing conditions in your
environment.
In high temperature triggers, your device will turn on,
only turning off when the measured temperature falls
below the set temperature by the buffer number you
have set here.
In low temperature triggers, your device will turn on,
only turning off when the measured temperature
rises above the set temperature by the buffer number
you have set here.
PROGRAMMING
PM
T°BUFF.
BUFFER HUMIDITY SETTING
The buffer used in the auto mode humidity trigger
can be adjusted to prevent the device from turning on
and off too quickly due to changing conditions in your
environment.
In high humidity triggers, your device will turn on,
only turning off when the measured humidity falls
below the set humidity by the buffer number you have
set here.
In low humidity triggers, your device will turn on, only
turning off when the measured humidity rises above
the set humidity by the buffer number you have set
here.
PM
H%
%
BUFF.
To Next Page
Loading...