AC Infinity SUNCORE - T-SERIES INSTALLATION GUIDE - PART 1; T-Series Step 1: Sensor Probe Connection; T-Series Step 2: Sensor Probe Securing

10
INSTALLATION
STEP 1
Locate the connector plug of the sensor probe
and plug it into the sensor port at the bottom
side of the controller.
STEP 2
Position the corded sensor probe and secure
it by using the included zip ties and tie mounts
if needed.
The probe can be placed inside a humidity
dome seedling tray to monitor the current levels.
*Do not allow the probe to be submerged in
water.
T-SERIES MODELS