Need help?Do you have a question about the AC Infinity THERMOFORGE Series and is the answer not in the manual?
General| Brand | AC Infinity |
|---|---|
| Model | THERMOFORGE Series |
| Category | Heater |
| Language | English |
General safety guidelines and precautions for using the heater to prevent hazards.
Features automation controls for heater activation based on temp/VPD.
Thermal sensor tracks climate shifts for precise environmental control.
Offers 10 heat/fan levels with efficient performance and reduced noise.
Hidden compartment for neat storage of extended cords.
Connects with UIS controllers for automations and schedule programming.
Flexible duct tubing for focused heat distribution.
Main heating unit included in the package.
Component to extend the heater's duct reach.
Device to measure environmental conditions like temperature and humidity.
Cable for connecting the heater to UIS controllers.
Fasteners for securing cables or components.
Accessory for positioning the sensor probe.
Instructions for placing the heater outside the grow tent and routing ducting.
Guide on how to use the duct extension to increase reach.
Connects the sensor probe to the heater and routes the probe head.
Plugs the heater into a power outlet to turn it on.
Instructions for wrapping and storing the power cord neatly.
Initial step to disconnect power before cleaning.
Instructions for twisting off the intake vent cap.
Using a damp cloth to clean dust and debris.
Enables connecting multiple grow devices to a central controller for integrated management.
Regulating the grow system via app for automation and climate data access.
Connecting grow lights and outlet devices using adapters.
Connects THERMOFORGE heaters to UIS controllers using an extension cord.
How to use the M-M extension cord and its gasket for protection.
Controller takes over onboard settings and display functions.
Explains modes like OFF, MINIMUM, ON, MAXIMUM, AUTO, VPD, TIMER, CYCLE for heating.
Explains modes like OFF, MINIMUM, ON, MAXIMUM, TIMER, CYCLE for fan operation.
Covers display, units, and sensor calibration adjustments.
Details alert icons, locking, and various safety/fail-safe features.
Toggles between HEAT and FAN functions.
Resets heater to default factory settings.
Locks the controller to prevent adjustments.
Turns off the display while programs continue running.
Quickly switches the heater to OFF Mode.
Resets current mode/setting values to default.
Turns button click sounds on or off.
Silences active alarms.
Explains why the heater screen turns off when connected to a UIS controller.
Clarifies which sensor probe is active when connected to a smart controller.
Provides guidance on how to route the heater's ducting.
Advises on placing the heater inside a grow tent based on humidity levels.
Overview of the central controller for the UIS platform.
Description of humidifiers for plant growth.
Description of duct fans for ventilation.
Details the two-year warranty against manufacturing defects.
Lists conditions not covered by the warranty, such as abuse or misuse.
Provides contact details for dealers and customer service.
To Next Page