2.3.5 Connecting to a LAN
To connect to a LAN (Local Area Network) you require a cat5, cat5e or cat6 network
cable (not supplied).
1. Connect one of the crystal plugs on the cable to the player’s RJ45 LAN socket;
2. Connect the other crystal plug on the cable to a RJ45 LAN port on your router,
switch, or hub devices.
2.3.6 Connecting to a WLAN
1. Make sure the player is powered on;
2. Plug the Wireless LAN USB Adapter (i.e. Wi-Fi USB Dongle) to the USB HOST port
of the player.
Note: The Wi-Fi Dongle is an optional accessory sold separately. (Please refer to ‘3.1.4
Changing Network Settings’ for more details about wireless setup)
1. Infrared receiver window
2. Working indicator
3. Power button & indicator
2.4 Front Panel
To Next Page
Loading...