AC STAG-300 QMAX PLUS - User Manual

AC S.A. all rights reserved. Under penalty of law and/or liability claims it is forbidden to copy, publish, distribute, make available and/or use in any way all or any part of information contained
within this document, in particular photographs, drawings, illustrations, trademarks, etc.
Controller User Manual
67R-01 4903
110R-00 4904
10R-03 6616
(information contained in this manual is also available
in the diagnostics software help system and at the www.ac.com.pl website)
ver. 1.7.9 2017-04-12

Summary

Controller Installation

The AC STAG Diagnostic Program

Controller-Computer Connection

Steps to connect the controller to a PC for diagnostics and software use.

Controller Parameters

Setting and configuring various vehicle-specific parameters.

Auto-Calibration & Oscilloscope

Error Handling

Identifying, displaying, and clearing controller and ECU errors.

Maps and Corrections

OBDII;EOBD Reader

Integrated tool for reading vehicle OBDII/EOBD parameters and faults.

Autoadaptation Modes

Explanation of ISA3 and OBD autoadaptation modes.

Controller Update & Diagnostics

STAG-4 QBOX;QNEXT;STAG-300 QMAX Controller Programming

Auto-Calibration Process

Steps for auto-calibrating the controller for optimal performance.

Map Collection & Matching

Technical Specifications

Warranty, Restrictions, Exclusions

AC STAG-300 QMAX PLUS Specifications

General

Brand	AC
Model	STAG-300 QMAX PLUS
Category	Controller
Language	English