AC STAG 400 User Manual

INSTALLATION MANUAL FOR LPG SYSTEMS
DESIGNED FOR DIRECT PETROL INJECTION ENGINES
PROGRAMMING MANUAL FOR STAG 400 DPI CONTROLLER
(also available in the diagnostic software and at www.ac.com.pl)
ver. 1.8 2021-01-13

AC STAG 400 Specifications

General

Brand	AC
Model	STAG 400
Category	Controller
Language	English

Summary

PART ONE – Installation of the System

1.1 List of Standards

Regulations applicable to the installation process.

1.2 Description of the LPG STAG 400 DPI System

Details about the STAG 400 DPI autogas system.

1.3 Principles Regarding Installation of Particular Elements in a Vehicle

Guidelines for installing system components in a vehicle.

1.4 Approval of a Vehicle for Installation of an LPG System

Requirements for approving a vehicle for LPG system installation.

1.5 The First Start-up of the Gas Injection System

Initial steps after installing the gas injection system.

1.6 Installation Quality Inspection

Procedures for checking the quality of the LPG system installation.

PART TWO – AC STAG Diagnostic Software

2.1 Description of the Diagnostic Software

Overview of the AC STAG diagnostic software features.

2.2 Programming the Controller

Steps and methods for programming the STAG controller.

2.3 Operation of the LED Switchboard and Sound Signals (User's Manual)

User guide for LED switchboards and sound signals.

2.4 Sound Signals

Explanation of sound signals emitted by the controller.

2.5 Technical Specification

Technical details and specifications of the STAG system.

2.6 Appendices

Supplementary information and guidelines for engine types.