32
■ How to Stop the ATV
When approaching the parking space:
* Check that the surroundings are in safe condition and
then slowly park the ATV.
* Put the accelerator lever back to the original position,
and pull both front and rear brake handle levers, which
will activate the brake light to alert coming ATVs in the
back.
■ When the ATV Comes to a Full Stop
Put the shift stick at the “N” position and turn the ignition
switch to the “OFF” position.
(1) Key hole (2) Key
Note:
*Turning off the ignition switch and removing the key during riding
will cause the electrical system to disable. This is a major cause
of an accident. Do not do that until the ATV comes to a full stop.
To Next Page
Loading...
