Accolade 2 LRF Pro - Page 61

Menu item Rangefinder allows you to set up built-in rangefinder’s parameters as follows:
1.
Enter the main menu with a long press of the Menu (3) button.
2.
Select the submenu Rangefinder with the UP (2)/DOWN (5) buttons.
3.
Enter the submenu with a short press of the Menu (3) button.
4.
Select the desired menu item with the UP (2)/DOWN (5) buttons.
Reticle Type
1.
Select the Reticle Type menu item with the UP (2)/DOWN (5) buttons.
2.
Press briefly the ?enu (3) button to enter submenu.
3.
Select one of the three reticle shapes with the UP (2)/DOWN (5) buttons.