Accolade 2 LRF Pro - TPA and THD Functions

4.
Confirm selection with a brief press of the ?enu (3) button.
5.
Selected reticle will appear on the display.
6.
The reticle will disappear from the display if the rangefinder is not used longer than 4
seconds.
TPA
Function "TPA" (Target Position Angle) allows you to measure the angle of target location
(angle of elevation). When the function is activated, the angle is shown continuously.
1.
Select TPA with the UP (2)/DOWN (5) buttons.
2.
Turn TPA on/off with a short press of the ?enu (3) button.
THD
"THD" (True Horizontal Distance) function allows you to measure true horizontal distance to a
target based on the angle of elevation value.
1.
Select THD with the UP (2)/DOWN (5) buttons.
2.
Turn THDon/off with a short press of the ?enu (3) button
3.
Hereinafter the message THD will appear above the distance readings.