5.
Pause and resume recording video with a short press of the REC (4) button.
6.
Stop recording video with a long press of the REC (4) button.
7.
Video files are saved to the memory card after stopping video.
8.
Switch between modes (Video-> Photo-> Video) with a long press of the REC (4)
button.
Photo mode.Capturing an image
1.
Switch to the Photo mode with a long press of the REC (4) button.
2.
Take a picture with a brief press of the REC (4) button. The image freezes for 0.5 sec
and a photo is saved to the internal memory.
3.
In the top left corner of the display you can see: photography icon , ">100" means
that you can take more than 100 pictures. If the number of available pictures is less than
100, actual amount of available pictures (for example 98) is shown next to the icon .
Notes:
You can enter and operate the menu during video recording.
Recorded videos and photos are saved to the built-in memory card in the format
img_xxx.jpg (photos); video_xxx.avi (videos). xxx – three digit counter for videos and
photos.
Counter for multimedia files cannot be reset.
Attention!
The maximum duration of a recorded file is five minutes. After this time expires, a video is
recorded into a new file. The number of recorded files is limited by the capacity of the
device's internal memory.
Check regularly the free capacity of the internal memory, move recorded footage to other
storage media to free up space on the internal memory card.
Important!
To playback video ?les recorded by thermal imaging devices on macOS based computers, we
recommend that you use VLC video player or Elmedia player.
Download links are shown below:
VLC Video Player
http://www.videolan.org/vlc/download-macosx.html
ELMEDIA Video Player
https://apps.apple.com/us/app/elmedia-multiformat-video/id937759555?mt=12
To Next Page
Loading...