What to do if Accora FloorBed 2 Medical Equipment FloorBed doesn't stop at the safety stop?
If the Accora Medical Equipment FloorBed does not stop at the Safety-stop position, verify that the main lift actuators are correctly plugged in at all points between the actuator and the control box.
How to troubleshoot Accora FloorBed 2 Medical Equipment FloorBed that is not working?
First, check if the ‘Power on’ indicator light on the handset is lit. If it's not, ensure the power supply is plugged in and turned on, and that the power lead in-line socket is correctly plugged in. If the light remains off, contact Accora for advice. If the indicator light is on, ensure the handset has been unlocked as described in Section 8. If problems persist, contact Accora for further assistance.
Classification as a Medical Device Class 1.
Specifies operating conditions for temperature, humidity, and pressure.
Controls for backrest, legrest, and bed elevation/lowering.
Operation of floor-level safety and Trendelenburg functions.
Recommends suitable detergents and cleaning methods.
Outlines the step-by-step process for cleaning the bed.
General| Product Type | Low Bed |
|---|---|
| Frame Material | Steel |
| Adjustability | Height, backrest, and knee break |
| Safety Features | low voltage |
| Safe Working Load | 250 kg |
| Overall Dimensions | 106cm x 224cm |
To Next Page