EasyManua.ls Logo

Accora FloorBed 2 - Accessories; Electrical Specification

Accora FloorBed 2
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© Accora: 01223 206100 | info@accora.uk.com | www.accora.uk.com 5
Technical information:
Description
Value
Overall dimensions
940mm W × 2290mm L
(37in W x 90in L)
Mattress platform dimensions*
900mm W × 2000mm L
(35.5in W x 78.75in L)
Bed castor
4 x 75mm with brake
(4 x 3in with brake)
Mattress platform height
71mm to 800mm
(2.8in to 31.5in)
Max self-help pole lifting load
75kg (12st) (165lb)
Safe Working Load**
185kg (29st) (407lb)
Maximum Patient Weight**
150kg (23.5st) (330lb)
Audible noise
53Db (A) typical TBC
Mass of Bed (excluding transport bracket)
93.2kg (14.5st) (205lb)
- Headboard
26.5kg (4st) (58.5lb)
- Footboard
26.5kg (4st) (58.5lb)
- Mattress platform, head end
23.0kg (3.5st) (50lb)
- Mattress platform, foot end
17.2kg (2.7st) (38lb)
Liquid Ingress Protection
IPX4 Splash resistant
Trendelenburg function
15 degrees
Expected service life
Typically 5 years
FloorBed mattress platform range including maximum
angles:
Key parts of the bed:
* The recommended patient height is 1460 1850mm.
Taller patients may be accommodated by using a
mattress platform extension.
** The safe working load is calculated as follows (as
specified by EN 60601-2-52):
Maximum patient weight: 150kg 23.5st 330lb
Mattress 20kg 3st 44lb
Accessories 15kg 2.5st 33lb
TOTAL (Safe working load) 185kg 29st 407lb
5. Accessories
1. Mattress platform extension extends the mattress
platform from 2000mm to 2200mm.
2. Siderails - integrated side rails made of soft
material.
3. Fixed and rotating bed levers assists with mobility
and patient transfers.
4. Headboard and footboard bumpers - reduce
impact and minimise the risk of injury.
5. Mattress platform safety sleeve reduces the risk of
entrapment in the mattress platform.
6. Electrical specification
Duty Cycle: Intermittent operation 2 min/18 min; this
implies that after the max. continuous action of two
minutes, there must be a break of 18 minutes.
The B symbol indicates this product has a
degree of protection against electric shock
for type B equipment.
Caution, read the instructions before use.
Degree of protection against liquid ingress.
Do not dispose of in household waste.
Degree of protection against electric shock:
Class II Double Insulated.
For indoor use only
Voltage supply
Voltage input frequency
Headboard
Footboard
Mattress platform, head section
Mattress platform, foot section
1
2
3
4