© Accora: 01223 206100 | info@accora.uk.com | www.accora.uk.com 7
4. Assemble the headboard and mattress platform
head end as shown below. Insert locking pin and
R-clip, as shown, in two positions.
5. Assemble the footboard and mattress platform
foot end as 4 above. Insert locking pin and R-clip,
as shown, in two positions.
6. Insert two mattress platform joining bars and
secure with locking pins and R-clips as shown in
two positions.
7. Join the two parts of the bed together using the
joining bars and secure with locking pins and R-
clips as shown in two positions.
8. The bed should now be assembled with 8 locking
pins and R-clips located as shown below.
9. Plug in four actuators and fit sliding protective
caps as shown below.
To Next Page
Loading...