Accu-Turn 1250 - User Manual

Need help?

Do you have a question about the Accu-Turn 1250 and is the answer not in the manual?

Summary

Changing Supply Voltage

Assembly of the Piezo Measurers

Logic Trouble Shooting Sequence

Replacing the Power Board

Function and Precision Check

Wheel Balancing Machine Calibration

Wheel Measurement and Presettings on the Balancing Machine

To Change Supply Voltage

Calibration of Automatic Gauges

3.1 - To Enable the Gauges

To Replace the Power Board

How to Check Functioning and Accuracy

Test of Proper Encoder Functioning

Procedure for testing the encoder's operational status and accuracy.

Meaning of Encoder Test Errors

Explanation of error codes encountered during encoder testing.

3. Encoder Count Test

3. Gauge Calibration

Gauge Calibration

5. Checking Machine Oscillation

Checking Machine Oscillation

Wheel Measurement and Setting on the Wheel Balancer

To Replace Power Board

Wheel Measurement and Presetting on the Balancing Machine

Initialization of New Board

Checking and Calibration of the Gauges

4.1 - Checking of the Rim Distance Gauge

4.2 - Calibration of the Distance Potentiometer

Procedure to calibrate the distance potentiometer.

4.3 - Calibration of the Diameter Potentiometer

Procedure to calibrate the diameter potentiometer.

Trouble Shooting Sequence

Programming the Balancing Board Via PC

Automatic Gauges

3.1 - Distance and Diameter Gauge Enable

3.2 - Calibration of the Distance Potentiometer

Procedure to calibrate the distance potentiometer.

3.3 - Calibration of the Diameter Potentiometer