Accu-Turn 8944 - Standard Accessories; 8944 Specifications

2
STANDARD ACCESSORIES INCLUDED WITH THE 8944 MULTI-SPEED BRAKE LATHE
1 Draw Bar with Hex Nut and Washer
1 T-Bolt with Nut and Washer
1 Spacer Block for Twin Cutter Attachment
2 Large Bell Clamps
2 Small Bell Clamps
3 Centering Cones
3 Silencers
5 Double Taper Radius Adapters
1 Twin Cutter with Tool Holders
1 Boring Bar with Tool Holder
1 Standard 1" Arbor
1 Arbor Nut
1 Arbor Spring
1 1" Spacer
1 Set of Alignment Washers
3 Wrenches 1 1/2", 7/8", 3/8"
8944 MULTI-SPEED BRAKE LATHE SPECIFICATIONS
115 Volt 50-60 --- Hertz 1 Phase 10.0 Amps
Rotor Capacity -------------------------------- 4" to 24"
Maximum width of surface ------------ 4 1/2"
Maximum thickness ------------------- 2 1/4"
Drum Capacity --------------------------------- 6" to 28"
Friction Surface Capacity ----------- 6"
Flywheel Capacity ----------------------------- 6" to 24"
Friction Surface Capacity ----------- 6"
Maximum Weight:
On 1" Arbor ------------------------- 150 lbs.
On 1 7/8" Arbor --------------------- 300 lbs.
Spindle Speed RPM ----------------------------- 100-150-200 RPM