AccuAir AS7812 - Specifications; Important Safety Information

To Next Page

To Previous Page

Important Safety Information

Input:

• Voltage: 18-30 VAC

Output:

• Maximum: 1 amp per terminal (3 amp total for all terminals)

• Temperature control ranges: 45°F to 90°F Accuracy: ± 1°F

• Differential range: 1°F to 3°F

• System conﬁgurations: Single-stage heat, single-stage cool

or single-stage heat pump, gas, oil,

electric

• Terminations: R, W, Y, O, B, G, C

SET

ROOM

DIFF

Temperature

differential setting

Room temperature

setpoint

• Always turn off the thermostat before installing, removing, cleaning, or servicing; turn off the power at

the main power source by unscrewing fuse or switching off circuit breaker

• Do not switch to “Cool” if room temperature is below 50

F; this could damage your A/C system and

cause injury

• Do not install on voltages higher that 30 VAC

• All wiring must conform to local and national building and electrical codes and ordinances

• While cleaning, do not get soap directly on thermostat switches or LCD readout; only use a damp cloth

with a mild soap to wipe outside of thermostat cover

Specications

AS7812