Need help?Do you have a question about the AccuAir ENDO-CVT23 and is the answer not in the manual?
General| Brand | AccuAir |
|---|---|
| Model | ENDO-CVT23 |
| Category | Automobile Accessories |
| Language | English |
Details the warranty coverage for the air compressor and other components.
Outlines the process for returning components for repair or replacement.
Provides crucial information regarding product usage, installation, and liability.
Discusses the power and ground cable specifications and recommendations for installation.
Explains the system's automatic shutoff feature based on battery voltage levels.
Details the pressure limits and behavior of the ENDO-CVT system.
Describes normal heat generation and the automatic shutoff mechanism.
Addresses the system's noise characteristics and mounting recommendations.
Advises on the placement and use of the inlet air filter for optimal performance.
Instructions for mounting the ENDO-CVT tank.
Plumbing connection and port plugging for the air spring system.
Connecting the control harness and installing the CVT adapter module.
Connecting the control harness ignition wire to the vehicle.
Connecting the adapter module's valve harness to the e-Level ECU.
Connecting trigger and pressure signal wires to the e-Level ECU.
Connecting the power harness for the system.
Adjusting the tank pressure setting within the e-Level system.
Adjusting flow controls for balanced vehicle lift and lower.
Calibrating the e-Level system after installation.
Details the pressure relief valve and its function in protecting the system.
Explains the connections and functions of the control harness plug.
Describes the power harness plug and PTC fittings used in the system.
Lists the physical dimensions and air spring port configurations of ENDO-CVT models.
Provides torque values for various fasteners used in the ENDO-CVT system.
Details the voltage, amperage, and ingress protection ratings for the ENDO-CVT.
Instructions for installing and removing air lines from PTC fittings.
Guidance on installing NPT plugs with thread sealant.
Illustrates the wiring and plumbing for a standard vehicle orientation.
Instructions for re-pinning the e-Level main harness connector for the adapter.
Description of the 8-pin adapter harness and its pin configurations.
Visual guide for removing and replacing MX150 wires.
Explains system status indicators and their corresponding LED blink sequences.
Details actions to take and reset procedures for various system statuses.
Step-by-step guide for operating the Quick Release (QR) mount system.
Detailed instructions for standard mounting of the ENDO Tank using QR mounts.
Instructions for mounting the ENDO Tank using the side mounting method.
Explains how flow adjustment screws control airflow speed for air springs.
Step-by-step guide to adjust flow controls for balanced vehicle lift/lower.
Step-by-step guide to change the e-Level system's tank pressure mode.
Detailed steps for removing PTC fitting components.
Steps for assembling PTC fitting components using a service kit.
Instructions for safely removing the ENDO tank end caps.
Steps for reassembling the ENDO tank end caps.
Details the internal WABCO compressor and its advantages.
Explains the internal ECU's role in monitoring and optimizing system operation.
Describes the system's isolation technology for reducing compressor vibrations.
Availability of the system in different corner configurations.
Highlights the integrated solenoid valves and tank caps.
Discusses the VFC™™ adjusters for controlling airflow speed.
Explains the benefits of FFPTC™™ fittings for preventing debris issues.
Information on the DOT approved and rebuild-able Push-To-Connect fittings.
To Next Page