AccuBANKER LED430 - 3.4 Micro-Printing Magnifier (only for LED430 model); 3.5 Size Analysis

9
3. Operation Description
Place the bill or document under the magnier window and proceed to inspect visually
the micro-printing elements and ne lines security features embedded in the bill or docu-
ment. Any low quality printing is a suspicious sign that must be considered during the
nal decision.
3.5 Size Analysis
The detector has a millimetric scale printed on the verication window that allows the
user to verify any specic bill or document size as well as to validate the right position of
any security feature inside the bill or document. Any displacement encountered on any
security feature could be a suspicious sign and other features must be veried to conrm
the bill or document authenticity.
NOTE: Avoid operating the unit close to strong natural/articial light source. The effect of
the UV light as well as the Watermark light will be overpowered and it will affect the good
visualization and analysis of the security features embedded on the bill or document.
3.4 Micro-Printing Magnier (only for LED430 model)