To Next PageTo Next Page
Need help?Do you have a question about the Acculab ALC series and is the answer not in the manual?
Crucial safety guidelines for proper use and to prevent equipment damage.
Initial steps for setting up and preparing the balance for operation.
Guidelines for protecting the balance/scale during storage and transit.
Instructions for safely removing the balance from its packaging and checking for damage.
Lists all components included with the balance/scale package.
Recommendations for selecting an optimal location for accurate weighing.
Procedure for acclimatizing the balance to a new environment before use.
Warning regarding potential radio frequency interference and FCC compliance.
Step-by-step guide on assembling the weighing pan and draft shield components.
Instructions for connecting the AC adapter and important safety considerations.
Guide on installing and using batteries as an alternative power source.
How to select the correct voltage for the AC adapter based on local power supply.
Procedure for ensuring the balance is level for accurate measurements.
Information on using the mounting lug to secure the balance against theft.
Step-by-step guide for performing basic weighing operations and taring.
Procedure for calibrating the balance to ensure accuracy after setup or relocation.
How to weigh components for mixture formulation using tare memory.
Program to determine the number of parts with approximately equal weight.
Function to obtain weight readouts as a percentage of a reference weight.
Program for determining weights under unstable conditions by averaging multiple readings.
How to switch the display between different weight units.
Guide to customizing balance settings using menu codes for specific requirements.
Visual overview of the balance's menu structure and available settings.
Instructions stating that repair work should only be performed by trained service technicians.
Procedures for cleaning the balance housing and weighing pan safely and effectively.
Detailed steps for safely removing and cleaning the weighing pan.
Guidelines for cleaning stainless steel parts, including approved and prohibited agents.
Checks to perform if the AC adapter or balance operation is no longer safe.
Guidance on recycling the environmentally friendly packaging materials.
Explanation of the CE marking and compliance with European directives for electromagnetic compatibility and safety.
General
