99
Display FunctionDisplay Function
Input Input InformationInformation
**
Indicates the input voltage value, which could beIndicates the input voltage value, which could be
displayed from displayed from 0 to 999Va0 to 999Vacc
Indicates the frequency value of input voltage, whichIndicates the frequency value of input voltage, which
could be displayed from 0 to 99Hzcould be displayed from 0 to 99Hz
Indicates the input voltage is higher than the SPECIndicates the input voltage is higher than the SPEC
range, if the voltage is normally, it can not be displayedrange, if the voltage is normally, it can not be displayed
Indicates the input voltage is lower than the SPECIndicates the input voltage is lower than the SPEC
range, if the voltage is normally, it can not be displayedrange, if the voltage is normally, it can not be displayed
Output InformationOutput Information
Indicates the UPS output voltage value, which could beIndicates the UPS output voltage value, which could be
displayed from displayed from 0 to 999Va0 to 999Vacc
Indicates the frequency value of the UPS outputIndicates the frequency value of the UPS output
voltage, which could be displayed from 0 to 99Hzvoltage, which could be displayed from 0 to 99Hz
Load InformationLoad Information
Indicates the load percent in Watt or VA, only theIndicates the load percent in Watt or VA, only the
maximum value of them could be displayed from 0 tomaximum value of them could be displayed from 0 to
199%199%
LCD DisplayLCD Display
To Next Page
Loading...