ACCUR8 DWS7100 - Alarm Mode and Settings

25
5.8 Alarm Mode
The DWS7100 includes the following alarms:
• Time (There are two alarms for time: Alarm 1 and Alarm 2)
• Outdoor Temperature
• Outdoor Humidity
• Outdoor AT (Apparent Temperature)
• Outdoor Dew Point
• Outdoor Feels Like Temperature
• Outdoor Dew Point
• Wind Gust
• Wind Average
• Rate Rainfall
• 24 Hour Rainfall
• Absolute Pressure
• Relative Pressure
• Indoor Temperature
• Indoor Humidity
• Indoor Dew Point
• UV Index
• Sunlight
• Sensor (CH1) Temperature
• Sensor (CH1) Humidity
• Sensor (CH1) Heat Index
• Sensor (CH1) Dew Point
Alarm Operation
When an alarm condition is exceeded, the alarm icon will flash (visual) and the alarm beeper will sound
(audible). To silence the beeper, press any button.
Viewing the High and Low Alarms
To view the current alarm settings, press the ALARM button to enter the alarm mode. HI AL 1 will be
displayed in the date area. At the same time Alarm 1 time and HI alarm parameters of indoor
temperature/humidity, outdoor temperature/humidity, rain rate, AT, feels like, wind gust, wind average,
absolute pressure, UV index, Sunlight, Sensor (CH1) temperature/humidity and dew point are displayed.
Press SET/MODE button to view Alarm 2 time and HI alarm parameters of indoor dew point, 24h rainfall,
outdoor dew point, relative pressure and Sensor (CH1) heat index.
Press ALARM button again to view the LOW alarms along with the alarm clock time in the same way as with
the HI alarms.
Press the SNOOZE button at any time to return to the normal mode.