ACCUR8 DWS7100 - Display and Wi-Fi Issues

54
Problem
Solution
Use the calibration feature to match the indoor and
outdoor temperature to a known source.
Indoor and Outdoor Humidity do not
agree
Allow up to one hour for the sensors to stabilise due to
signal filtering. The indoor and outdoor humidity
sensors should agree within 10 % (the sensor
accuracy is ± 5 %).
Use the calibration feature to match the indoor and
outdoor humidity to a known source.
Display console contrast is weak
Replace console batteries with a fresh set of batteries.
Wi-Fi does not display on console.
Check your router for problems.
1. Check Wi-Fi symbol on the display. If wireless
connectivity is successful, the Wi-Fi icon
will be displayed in the time field.
2. Make sure your modem Wi-Fi settings are
correct (network name, and password).
3. Make sure the console is plugged into AC
power. The console will not connect to Wi-Fi
when powered by batteries only.
4. The console only supports and connects to
2.4 GHz routers. If you own a 5 GHz router,
and it is a dual band router, you will need to
disable the 5 GHz band, and enable the 2.4
GHz band.
5. The console does not support guest networks.