16
INSERTING BATTERIES
1. Remove the battery cover on the back of the
device as shown by the graphic to the right.
2. Insert 3 x AAA batteries. Make sure the positive
+ and negative – signs correspond with the
markings in the device when inserting batteries.
Reinstall the battery cover as shown by the
graphic to the right.
Notes:
n Please use 3 x AAA batteries in this TENS unit.
n Remove the batteries if the device is not in use
for long periods of time.
n Do not mix old and new batteries or different
types of batteries.
n Remove exhausted batteries from the unit.
n Warning: If batteries leak and come into contact
with the skin or eyes, wash immediately with
large amounts of water.
n Batteries must be handled by an adult. Keep
batteries out of the reach of children.
n Dispose the used batteries safely according to
local regulations.
ATTACHING THE BELT CLIP
n To attach the belt clip to the device, simply slide
the clip up into the two connecting points until
you hear a click.
n To remove the belt clip from the device, simply
slide the belt clip down.
To Next Page
Loading...
