ACCUZONE MAXICOOL AZ08EWB - Operation

Confirm that the vent tube has been mounted properly.
• When using functions on cooling and dehumidifying, keep an interval of at least 3 minutes
between each ON/OFF.
• Be sure wall socket provides standard 110-115V AC, 60Hz use.
• Do not share one socket with other appliances.
• Press the “MODE” button until the “Cool” icon appears.
• Press the “DOWN” or “UP” button to select a desired room temperature between 61-88
°F (16-31 °C ).
• Press the “SPEED” button to select fan speed.
• Press the “MODE” button until the “Dehumidify” icon appears.
• The unit will automatically set the selected temperature to current room temperature minus
2°F/1°C .
• The unit will automatically set the fan LOW speed.
IMPORTANT: Please read manual section “WATER DREAINAGE” regarding options for draining
collected water from the unit.
• Press the “MODE” button until the “Fan” icon appears.
• Press the “SPEED” button to select fan speed.
Programming Timer ON setting:
• When the air-conditioner is OFF, press the “TIMER” button and select a desired ON time using the
“UP” and “DOWN” buttons.
• Confirm the selected time by pressing the “TIMER” button once. (If you do not confirm, the TIMER
“ON” will not go into eect.)
• Selected ON time is displayed on the operation panel.
• ON time can be set to 0-24 hours in 1-hour increments.
Programming Timer OFF setting:
• When the air-conditioner ON, press “TIMER” button and select a desired OFF time using the “UP” and
“DOWN” buttons.
• Confirm the selected time by pressing the “TIMER” button once. (If you do not confirm, the TIMER
“OFF” will not go into eect.)
• Selected OFF Time is displayed on the operation panel.
• OFF time can be set to 0-24 hours in 1-hour increments.
REMOTE CONTROL ONLY
• While in cooling mode, press the SLEEP key ON REMOTE CONTROL to set the temperature. It
increases
2°F/1°C after an hour and at most increases 4°F/2°C after 2 hours.
CAUTIONS
Cooling
Dehumidifying
Fan
Timer
Sleep
9
Operation