Cleaning and Maintenance
Checking Before Usage
1. Check that air inlets and air outlets are not blocked.
2. Check if circuit breaker and connection are in good condition.
3. Check that filters are clean.
4. Check whether batteries in remote control are installed.
5. Check whether joint, window bracket and heat discharge pipe are installed tightly.
6. Check that heat discharge pipe is not damaged.
Checking After Usage
1. Disconnect power supply.
2. Clean filter and case.
3. Remove dust and debris on the unit.
4. Eliminate accumulated water in chassis.
5. Check that window bracket is not damaged.
Long-time Storage
If you won't use the unit for a long time, we suggest that you follow the steps below in order to maintain
the unit in good condition.
1. Make sure there is no water in chassis and the heat discharge pipe is disassembled.
2. Unplug the unit and pack the power cord.
3. Clean the unit and wrap it well to prevent the gathering of dust.
Notice for recovery
• Many packing materials are recyclable materials. Please deal with them through local recycle bin.
• If you want to throw away the air conditioner, please contact local division or consultant service
center for the correct disposal method.
To Next Page