Error codes
When appliance status is abnormal, temperature indicator on the unit will blink and display corresponding
error code. Please refer to list below for identification of error code.
Chassis is full of
water.
1. Pour out the water inside chassis.
2. If "H8" still exits, please contact professional person to maintain the
unit.
Malfunction of
ambient temperature
sensor.
Please contact professional person to deal with it.
Malfunction of
evaporator
temperature sensor.
Please contact professional person to deal with it.
1.Refrigerant is
leaking
2.System is blocked
1.
Re-energize the unit after turning off and pulling out the plug for
30 minutes;
2.
If there's still malfunction, please contact after-sales service
Overload protection
for compressor
1.
Check if the unit is under high-temperature and high-humidity
environment; if ambient temperature is too high, power off the
unit and then energize it for operation after the ambient
temperature drops to 0 below.
2.
Check if the evaporator and condenser are blocked by some
objects; if yes, take away the objects, power off the unit and then
energize it for operation.
3.
If the malfunction still occurs, please contact our after-sales
service center.
1.
Check if the unit is under high-temperature and high-humidity
environment; if ambient temperature is too high, power off the
unit and then energize it for operation after the ambient
temperature drops to 0 below.
2.
Check if the evaporator and condenser are blocked by some
objects; if yes, take away the objects, power off the unit and then
energize it for operation.
3.
If the malfunction still occurs, please contact our after-sales service
center.
Outdoor tube
temperature sensor
is open/short-
circuited.
Please contact after-sale service person to deal with it.
●
If the following phenomena occur, please turn off the air conditioner and disconnect the power
immediately, and then contact dealer immediately.
→ Power cord is overheating or damaged.
→ Abnormal sound during operation.
→ Odour.
→ Water leakage.
●
Do not repair or refit the air conditioner by yourself.
●
If operating the air conditioner under abnormal conditions, it may cause malfunction, electric shock or
fire hazard.
To Next Page