Safety Precautions
Wiring
• Do not turn the power on before finishing installation.
• If the supply cord is damaged, it must be replaced by a qualified person to avoid problems.
• The temperature of refrigerant circuit will be high, please keep the interconnection cable away
from the copper tube.
• The appliance shall be installed in accordance with national wiring regulations.
• The grounding resistance should comply with national electric safety regulations.
• If the length of power connection wire is insufficient, please contact the dealer for a new one. Do
not extend the wire yourself.
• The fuse type to use is T3.15AH250V.
• Allowed maximal current pass through the fuse cannot be above 3.15A
To Next Page
Loading...