ACDelco ARM601-3 User Manual

ARM601-3
DIGITAL TORQUE WRENCH
PRODUCT INFORMATION MANUAL
Manuel informations du produit
Manual información del producto
English
Français
Español
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY,
OPERATION, MAINTENANCE AND STORAGE OF THIS PRODUCT.
CE MANUEL CONTIENT DES INFORMATIONS IMPORTANTE CONCERNANT LA
SECURITE, L'OPERATION, LA MAINTENANCE ET LE STOCKAGE DE CE
PRODUIT.
ESTE MANUAL CONTIENE INFORMACIÓN IMPORTANTE ACERCA DE LA
SEGURIDAD, FUNCIONAMIENTO, MANTENIMIENTO Y ALMACENAMIENTO DE
ESTE PRODUCTO.
DO NOT ATTEMPT TO OPERATE THE TOOL UNTIL YOU HAVE READ AND UNDERSTOOD ALL
INSTRUCTIONS AND SAFETY RULES CONTAINED IN THIS MANUAL. FAILURE TO COMPLY
MAY RESULT IN ACCIDE
NTS INVOLVING FIRE, ELECTRIC SHOCK, OR SERIOUS PERSONAL
INJURY. SAVE THIS OWNER’S MANUAL FOR FUTURE REFERENCE AND REVIEW IT
FREQUENTLY FOR SAFE OPERATION.
NE PAS TENTER D'OPERER L'OUTIL TANT QUE VOUS N'AVEZ PAS LU ET COMPRIS TOUTES
LES INSTRUCTIONS ET REGLES DE SECURITE CONTENUES DANS CE MANUEL. SINON VOUS
RISQUEZ DES ACCIDENTS TELS QU'UN INCENDIE, UNE ELECTROCUTION, OU DES
BLESSURES CORPORELLES GRAVES. CONSERVEZ CE MODE D'EMPLOI EN CAS DE BESOIN ET
RELISEZ-LE SOUVENT POUR UTILISER VOTRE OUTIL EN TOUTE SECURITE.
NO UTILICE ESTA HERRAMIENTA HASTA HABER LEÍDO Y COMPRENDIDO TODAS
LAS
INSTRUCCIONES Y NORMAS DE SEGURIDAD CONTENIDAS EN ESTE MANUAL. SI NO LO
HACE PODRÍA PROVOCAR ACCIDENTES CON FUEGO, DESCARGA ELÉCTRICA O LESIONES
PERSONALES SERIAS. GUARDE ESTE MANUAL DE INSTRUCCIONES PARA SU CONSULTA EN
EL FUTURO Y REVÍSELO FRECUENTEMENTE PARA UN USO SEGURO.
40731986-NA

ACDelco ARM601-3 Specifications

General

Brand	ACDelco
Model	ARM601-3
Category	Power Tool
Language	English

Summary

Intended Use and General Safety

Safety Symbols and Alert Words

Explains the meaning of DANGER, WARNING, CAUTION, and NOTE symbols used in the manual for hazard identification.

Safety Rules and Warnings

Safety Symbols and Precautions

Risk of Flying Particles

Warns about the risk of flying particles due to over-torque, tool breakage, or accessory failure.

Personal and Electrical Safety

Electrical Shock Hazards

Details risks of electrical shock and precautions to avoid them.

Safe Operating Practices

Emphasizes staying alert, using PPE, maintaining balance, and avoiding wet conditions for safe operation.

Tool Use and Care

General Usage Precautions

Outlines essential precautions for using the digital torque tool, including proper handling, maintenance, and avoiding misuse.

Battery Tool Use and Specific Safety

Operating Temperature and Fastener Safety

Specifies the recommended operating temperature range and the importance of using undamaged fasteners.

Functional Description and Specifications

Controls and Display Elements

Technical Specifications

Provides detailed technical specifications including model, drive, voltage, accuracy, range, and dimensions.

Assembly and Battery Management

Battery Installation and Replacement

Step-by-step guide for installing and replacing batteries in the torque wrench, with important handling notes.

Operation Guide

Powering On and Zeroing

Selecting Operation Modes

Unit Selection and Setting

Setting Torque Alarm Values

Explains the process for setting target torque values and associated audio alarms for precise tightening.

Advanced Operation Features

Adjusting Target Torque Values

Overload Protection and Warnings

Torque Wrench Usage

Correct and Incorrect Usage