ACDelco I-7002 - User Manual

Owner’s Manual
Model No.: I-7002
Fully Automatic Microprocessor Controlled
Battery Charger for 12-Volt Lead Acid Batteries
ACDelco, ACDelco Emblem, and the
ACDelco related graphics are General
Motors Trademarks used under license
to MVP(H.K.) Industries Ltd.
Consumer enquiries: 1 888 201 0259
Detroit, Michigan 48243
©1995 GM Corp. All Rights Reserved.
Printed in China

Summary

Save These Instructions

Product Description

Important Safety Instructions

Risk of Explosive Gases

Understanding the dangers of explosive gases from lead-acid batteries and precautions.

Personal Precautions

Essential personal safety measures, including eye protection and avoiding sparks.

Before Use Guidelines

Preparing to Charge

Steps for safely preparing a battery for charging, including cleaning and checking terminals.

Charger Location

Recommendations for placing the charger away from the battery and ensuring ventilation.

How to Use

Negative Ground Hook-up

Detailed steps for connecting the charger to a vehicle with a negative ground system.

Battery Removed Hook-up

Instructions for connecting the charger to a battery removed from a vehicle or boat.

Maintenance

Operation

On;Off Key

How to turn the charger on and off and the initial display status.

Select Key

Using the select key to choose the appropriate battery charging rate.

Volt;Bat.% Key

Checking battery voltage and charge percentage.

Function Key

Activating the maintenance or pulse cycle for battery desulfation.

Reinforced Activation Mode

Using a special mode to revive batteries with plate deposits.

Specifications

Error Codes

Status Codes

Troubleshooting Problems

FCC Compliance Statement

Limited Warranty

ACDelco I-7002 Specifications

General

Brand	ACDelco
Model	I-7002
Input Voltage	120V AC
Output Current	2A
Output Voltage	12V DC
Battery Type	AGM, Gel
Compatibility	12V batteries
Safety Features	Overcharge protection, Short circuit protection