ACDelco I-7005T User Manual

CAUTION:
Read all Safety Rules carefully, and folllow all Operating Instructions when using this product.
Fully Automatic Microprocessor Controlled
Battery Charger for 12-Volt Lead Acid Batteries
Owner’s Manual
Model No.: I-7005T
Detroit, Michigan 48202
©2006 GM Corp. All Rights Reserved.
Printed in China
ACDelco, ACDelco Emblem, and the
ACDelco related graphics are General
Motors Trademarks used under
license to MVP(H.K.) Industries Ltd.
Consumer enquiries: 1 887 246 6006
WARNING
Monitor battery during first hour of operation and check battery during charging
process. If smoke or other signs of excessive heat are detected or if battery emits
a rotten egg smell, your battery is may be critically damaged and charging should
be terminated. Immediately vent the room by opening windows, unplug the battery
charger, allow the charger and the battery to cool down and then properly dispose
of the battery. Do not attempt to charge the damaged battery! Failure to adhere to
this warning may cause serious injury or property damage.

ACDelco I-7005T Specifications

General

Brand	ACDelco
Model	I-7005T
Type	Battery Charger
Voltage	6V/12V
Amperage	5A
Compatibility	Lead-acid batteries
Safety Features	Overcharge protection, Reverse polarity protection

Summary

General Operating Instructions

Explosive Gas Danger

Warns about explosive gases from lead-acid batteries and requires following instructions.

Personal Safety Precautions

Battery Handling Safety

Covers personal protection, acid contact, sparks, metal items, and battery types.

Before Use: Preparation and Location

DC Connection Precautions

How to Use: Vehicle Hook-up

Negative Ground Vehicle Connection

Step-by-step guide for connecting the charger to a vehicle with a negative ground system.

How to Use: Battery Removed

Charging Battery Outside Vehicle

Instructions for charging a battery that has been removed from the vehicle.

Marine Battery Charging Safety

Specific safety warnings and procedures for charging marine batteries.

Operation Modes and Controls

Charger Control Panel Functions

Explains the ON/OFF, Select, Volt/Bat.%, and Function keys on the control panel.

Understanding Charge Rates

Advanced Operation Modes

Maintenance Cycle Mode

Reinforced Activation Mode

Optimized Charging and Time Estimates

CCA Input for Optimized Charging

Interpreting Charging Displays

Error Codes and Status Indicators

Troubleshooting Error Codes

Lists and explains common error codes (Er0-Er5) and their resolutions.

Understanding Status Codes

Troubleshooting and Specifications

Common Operational Problems