ACE RC 8310 - PS3 i Transmitter Functions - Part 4; Steering Adjust Rate Control (ARC;ST); Throttle Adjust Rate Control (ARC;TH); Brake Adjust Rate Control (ARC;BR)

14
5.1) ARC/ST
The ARC/ST function adjusts the
sensitivity of the steering servo
responsiveness near the neutral position.
This setting affects both left and right
steering servo movements at the same
time and by the same percentage.
Negative steering ARC setting provides
lower sensitivity around the neutral point
area and higher responsiveness out of the
neutral point area. Positive steering ARC
provides the opposite effect.
5.2) ARC/TH
The ARC/TH adjusts the throttle responsiveness by setting a curve from neutral point to full throttle
position. Positive ARC/TH increases the response while negative ARC/TH broadens the power band.
5.3) ARC/BR
The ARC/BR adjusts the brake responsiveness by setting a curve from neutral point to throttle full close
position. Positive ARC/BR for sharper braking-power and negative for milder braking-power.
Default 0%
Adjusting Range -100%~100%
Default 0%
Adjusting Range -100%~100%
Default 0%
Adjusting Range -100%~100%