To Next PageTo Next Page
Need help?Do you have a question about the ACE RC Cougar P3 and is the answer not in the manual?
Advanced frequency-hopping program for safety, reliability, and interference-free communication.
Binding feature to ensure transmitter/receiver bind only to each other, preventing interference.
Failsafe program allowing individual channel to restore to initial settings during signal loss.
Improved data format for faster, less power-consuming, and reliable data transmission.
Lists key features of the Cougar PS3i transmitter, including display, memory, and trims.
Lists key features of the Cougar P2/P3 transmitters, including 2.4GHz technology and trims.
Using the PS3i dual rate lever to adjust the steering servo's dual rate amount.
Adjusting throttle travel independently for idle and maximum power on P2/P3.
Adjusting steering travel while running using the P2/P3 dual rate dial.
In-depth descriptions of PS3i transmitter functions like Power On, Audio settings, D/R, EPA, and ARC.
In-depth descriptions of P2/P3 transmitter functions like Servo Reversing, iFHss/iFHss+, Trims, ATV, and D/R.
Step-by-step guide for replacing or installing batteries in the transmitter.
Instructions for installing batteries in the receiver battery holder.
Steps and details for powering on the PS3i transmitter and initial display.
Adjusting steering servo sensitivity and angles for improved control on PS3i.
Adjusting full throttle and low/brake amounts for PS3i throttle servo.
Adjusting steering servo responsiveness near neutral position on PS3i.
Setting maximum travel end points for PS3i servos for precise control.
Adjusting throttle responsiveness from neutral to full throttle on PS3i.
Changing servo movement curve for PS3i steering and throttle responsiveness.
Selecting backward compatible iFHss or fast data mode iFHss+ on P2/P3.
General| Scale | 1/10 |
|---|---|
| Chassis Material | Plastic |
| Servo | Standard |
| Drive | 4WD |
| Tire Type | Rubber |
| Motor | Brushed |
| Battery | NiMH |
