Need help?Do you have a question about the Acelity V.A.C.ULTA and is the answer not in the manual?
Procedure to check the therapy unit for physical damage.
Procedure to ensure the therapy unit battery has sufficient charge.
Verifying and adjusting regional settings on the therapy unit.
Initial setup steps for therapy unit testing.
Testing the alarm functions of the V.A.C.® Therapy unit.
Testing the alarm functions of the V.A.C. VERALINK™ cassette.
Procedure to test the pump performance of the therapy unit.
General| Therapy Type | Negative Pressure Wound Therapy |
|---|---|
| Modes | Continuous, Intermittent |
| Power Source | AC Power Adapter, Internal Battery |
| Battery Type | Lithium-ion |
| Canister Capacity | 1000 mL |
| Alarms | Leak, Canister full, Low battery, System error |
| Display | LCD Screen (shows pressure, mode, battery life, alarms) |
| Connectivity | USB |
| Operating Temperature | 10°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Relative Humidity | 15% to 95% non-condensing |
To Next Page
