5
CONTROLS AND CONNECTORS
CABLE CONNECTIONS
Turn off your computer before performing the procedure below.
1 Connect one end of the 15-pin VGA cable to the back of the monitor and
connect the other end to the computer’s D-Sub port.
4. (Option-only for Audio model)Connect the audio cable between the
monitor's audio input and the PC's audio output (green port).
5. Plug the power cable of your monitor into a nearby outlet. Plug the other
end of the power cord into the PC port.
6. Turn on your monitor and computer.
Figure 1 Connecting Cables
1. Power Cable 2. Signal Cable
3. Audio cable (Option-only for
Audio model)
3
To Next Page
Loading...
