What to do if my Acer AL1932 Monitor has no picture?
If your Acer Monitor displays no picture, first ensure the power switch is in the ON position and that the power cord is securely connected. Also, verify that the video cable is properly connected to both the monitor and your computer. Finally, try moving the mouse or pressing any key on the keyboard to exit 'active off' mode.
How to fix Acer AL1932 when the power LED is not on?
If the power LED on your Acer Monitor isn't lit, check that the power switch is in the ON position and that the power cord is properly connected.
How to center image on Acer AL1932?
If the image on your Acer Monitor isn't sized or centered correctly, press the Auto key to allow the monitor to automatically optimize the display's position. For manual adjustments, see 'Position adjustment'.
Why does my Acer Monitor picture bounce or have a wave pattern?
If the image on your Acer Monitor bounces or shows a wave pattern, try moving or switching off any nearby electrical devices that might be causing interference. Also, inspect the monitor's video cable to make sure none of the pins are bent.
Instructions for correctly assembling the monitor base to the screen.
Guidance on how to pack the monitor using original materials for shipping or transport.
Information on the monitor's adjustable viewing angle range.
Details the function of each physical button on the monitor for control.
Instructions on how to navigate and adjust the On-Screen Display (OSD) settings.
Explains the various picture adjustment options available in the OSD menu.
General| Pixel pitch | 0.294 mm |
|---|---|
| Response time | 12 ms |
| Display diagonal | 19 \ |
| Display resolution | 1280 x 1024 pixels |
| Vertical scan range | 56 - 75 Hz |
| Horizontal scan range | 30 - 80 kHz |
| Viewable size, vertical | 301 mm |
| Contrast ratio (typical) | 500:1 |
| Viewable size, horizontal | 376 mm |
| Viewing angle, horizontal | 140 ° |
| Display brightness (typical) | 400 cd/m² |
| Security features | Kensington Lock supported |
| Speakers and microphone | 2x1.1W |
| Certification | TCO'99 |
| Market positioning | - |
| I/O ports | -D-Sub mini 15 -DVI-D |
| Plug and Play | Yes |
| Panel mounting interface | 100 x 100 mm |
| Power consumption (typical) | 50 W |
Weight and Dimensions| Depth (without stand) | 190.6 mm |
|---|---|
| Width (without stand) | 455.8 mm |
| Height (without stand) | 458.5 mm |
| Weight (without stand) | 7100 g |
To Next Page
