- 34 -
1. CHECK THE Q’TY AND LOCATION OF
AL FOIL
1. GET LCD COVER AND INSPECT ITS
APPEARANCE
2. ASSEMBLE LCD COVER TO BEZEL
3. STICK 1*PCS TAPE AT THE APPOINTED
PLACE
1. FETCH TRAVEL CARD, TEAR OFF
1*PCS APPOINTED S/N FROM TRAVEL
CARD AND PASTE IT ON THE COVER
2. LOCK 2*PCS SCREW (F3*8-B) TO
FASTEN BEZEL AND LCD COVER
3. GET STAND NECK AND INSPECT IF IT
IS DIRTY AND SCRATCHED,THEN PUT
IT IN THE CONVEYER
To Next Page
Loading...
