Appendix A: Server management tools
104
3 Select a drive marked as READY and press Enter.
4 Select Make Hot Spare and press Enter.
5 Select Yes then you will see the HDD is changed from READY to
HOTSP.
6 Press ESC to return to the Management Menu.
Save and Exit LSI RAID Configuration Utility
1 When RAID configuration, initialization and assigning hot spare is
completed, press ESC in the Management Menu and select YES
to exit the RAID Configuration Utility.
2 Press Ctrl + Alt + Del to reboot the server.
3 Now you can start to install OS.
To Next Page
Loading...
