69
5
If desired, you can opt to enable the Password on boot parameter.
6 When you are done, press F10 to save the changes and exit the BIOS Setup Utility.
Others
The Others screen contains various parameter settings.
The table below describes the parameters in this screen. Settings in boldface are the
default and suggested parameter settings.
Parameter Description
Low Battery Alarm Determines whether or not the system will alarm when the battery
power is low.
Options: Enabled or Disabled
Panel Close Alarm Determines whether or not the system will alarm when the display
cover is closed.
Options: Disabled or Enabled
System Beep Determines whether or not the system will emit a beep on boot up.
Options: Enabled or Disabled
As1400.book Page 69 Monday, March 11, 2002 11:45 AM
To Next Page
Loading...
