How to fix Acer Aspire 3610 with no beep, power-on indicator off, and blank LCD?
If your Acer Laptop has no beep, the power-on indicator turns off, and the LCD is blank, see “Power System Check” on page 57. Ensure every connector is connected tightly and correctly. Reconnect the DIMM, LED board, and System board.
How to fix Acer Aspire 3610 with no beep, power-on indicator on, and blank LCD?
If your Acer Laptop has no beep, the power-on indicator turns on, and the LCD is blank, see “Power System Check” on page 57. Reconnect the LCD connector. Also, check the hard disk drive, LCD inverter ID, LCD cable, LCD Inverter, and LCD System board.
General| Storage | 40 GB HDD |
|---|---|
| Graphics | Intel GMA 900 |
| Operating System | Windows XP Home |
| Optical Drive | DVD/CD-RW Combo |
| Wireless | 802.11b/g |
| Processor | Intel Celeron M 370 |
| RAM | 256 MB DDR2 |
| Display Resolution | 1280 x 800 |
| Weight | 2.8 kg |
| Battery | Li-Ion |
| Ports | 3 x USB 2.0, VGA, Ethernet |
Tool for configuring hardware settings and boot options.
Guide to updating the system's BIOS firmware.
Essential precautions and tools needed for disassembly.
Visual map of the sequence for taking the laptop apart.
Step-by-step guide to safely remove the battery.
Instructions for accessing and removing RAM and HDD.
Steps to disassemble the laptop's display assembly.
Diagnostic steps for common hardware issues.
Procedures to verify power adapter and battery health.
Explanations of POST error codes and their causes.
To Next Page
