Acer Aspire 4520 - Removing the Keyboard and LCD Module

Chapter 3 61
Removing the Keyboard and LCD Module
1. Remove the eight screws fastening the keyboard and LCD module to the main unit.
2. Turn the notebook over and gently pry up and remove the power board cover as shown.
3. Lift the keyboard up and towards you.
4. Disconnect the keyboard cable from the main board and remove the keyboard from the main unit.
5. Disconnect both ends of the power board cable.
6. Disconnect the LCD module and microphone cables, and pull through the wireless LAN antennas from
the underside of the main unit.
7. Remove the six screws securing the hinges.