34 Chapter 3
Removing the Hard Disk Drive Module
1. See “Removing the Battery Pack” on page 30.
2. See “Removing the SD Dummy Card” on page 31.
3. See “Removing the Back Cover” on page 32.
4. See “Removing the DIMM Modules” on page 33
5. Remove the one screw (B) securing the hard disk drive module.
6. Lift the hard disk drive module and remove it from the hard disk drive bay.
NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
Size (Quantity) Color Torque Part No.
M2 x L3 (1) Black 1.6 kgf-cm 86.00F80.723
To Next Page
Loading...
