Chapter 3 117
Replacing the WLAN Module
1. Place the WLAN bracket in the module.
1. Replace two (2) screws to secure the WLAN bracket.
1. Insert the WLAN Module into the WLAN socket. 2. Replace the two (2) screws to secure the module.
3. Connect the two (2) Antenna cables to the module.
NOTE: The black cable connects to the upper
terminal (MAIN) and the white cable to the
lower terminal (MAIN).
4. After connecting the cables to the terminals,
replace the mylar to avoid trapping.
To Next Page
Loading...
