82 Chapter 3
Removing the LCD Bezel
1. See “Removing the LCD Module” on page 61.
2. Remove the two upper and two lower bezel screw caps and screws.
NOTE: The two center caps are protection only and do not cover screws.
3. Starting from the lower right side of the bezel, pry the bezel upwards and away from the panel. Move along the
top and right until all sides of the bezel are removed.
NOTE: If necessary, use a pry to lift up the outside edges of the bezel.
Step Size Quantity Screw Type
LCD Bezel M2.5*6 4
To Next Page
Loading...
