Chapter 3 47
4. Push out the latches on both sides of the DIMM socket to release the DIMM.
5. Remove the DIMM module.
Removing the Back Cover
1. See “Removing the Battery Pack” on page 44.
2. See “Removing the SD Dummy Card” on page 45.
3. See “Removing the DIMM Module” on page 46.
4. Remove the two captive screws and three screws (A) securing the back cover.
Size (Quantity) Color Torque Part No.
M2.5 x L8 (3) Black 3 kgf-cm 86.00E34.738
To Next Page
Loading...
