66 Chapter 3
Disassembling the Main Unit
Separate the Main Unit Into the Upper and the Lower Case Assembly
1. Remove the screw fastening the ODD from the bottom of the notebook.
2. Push the ODD module outwards and gently pull it out as shown.
3. Press and release the PC dummy card from the PC slot as shown.
4. Then press the release the memory dummy card from the 5-in-1 card reader slot as shown.
5. Remove the nine screws fastening the upper case and the lower case assembly on the bottom.
6. Remove the eight screws fastening the upper case assembly and the lower case assembly on the front
side.
To Next Page
Loading...
