Acer Aspire 8730 Series - Removing the Discrete Board Module (for Discrete Models Only)

82 Chapter 3
Removing the Discrete Board Module (For Discrete Models Only)
NOTE: Aspire 8730/8730Z Series uses the NVdia board, while Aspire 8530 Series uses the ATI board. The
process for removing the board are the same for models with discrete board module.
1. See “Removing the Battery Pack” on page 54.
2. See “Removing the Lower Cover” on page 56.
3. See “Removing the Heatsink Module” on page 78.
4. Remove the two screws (B) securing the discrete board to the system.